Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: Welcome #6704
    ckidder
    Keymaster

    Yes, the ESP32 can get OTA updates as well. If you check there is probably a new version for you to download. I don’t know why your charger is still going to 100% SOC. What charger are you using?

    Temperatures are in C not F.

    in reply to: Welcome #5496
    ckidder
    Keymaster

    Yes, in newer firmware that should be released soon it is possible to set conditions based on state of charge or voltage. It might not do the grid relay yet but I can add that before we release a new version.

    in reply to: ESP32Due – Termination Resistors #5494
    ckidder
    Keymaster

    There isn’t a way to disable the termination on the ESP32Due. Well, you can but you’d need to remove the resistors with a soldering station or hot air station. It is generally OK if the bus goes to 40 ohms but any more termination than that is surely asking for trouble. It really is best to shoot for the proper 60 ohms if at all possible.

Viewing 3 posts - 1 through 3 (of 3 total)